Installing The Water Filter - Makita XCV12 Manual De Instrucciones

Aspiradora alámbrica / inalámbrica
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3.
Mount the damper on the powder filter and then
place them in the prefilter with aligning the mounting
position markings.
4.
Finally, mount the tank cover and lock it.
6
6
6
► 1. Tank cover 2. Powder filter (HEPA) 3. Damper
4. Prefilter 5. Tank 6. Mounting position marking
NOTICE:
Before using the powder filter, make
sure that prefilter and damper are always used
together. It is not allowed to install powder filter
solely.

Installing the water filter

Optional accessory for cloth filter model
CAUTION:
Never pick up water or wet dust
without the float and the cloth filter or the water
filter.
CAUTION:
For picking up wet dust, make
sure that the float cage and the float are installed
on the cleaner.
CAUTION:
When installing the water filter on
the tank, set it tight at the opening of the tank so
that the hook of the water filter engages the tank
opening firmly and there is no space between the
water filter and the tank.
To pick up water or wet dust only, the water filter is more
suitable than the cloth filter.
When installing the water filter, align its mounting posi-
tion mark with the one on the tank.
1
3
2
3
3
4
► 1. Water filter 2. Tank 3. Mounting position marking
NOTE: It is recommended using water filter when
picking up large amount of water repeatedly.
Otherwise vacuum ability may be reduced in case of
5
cloth filter.
Installing the paper pack
Optional accessory
WARNING:
use the cloth filter or prefilter together that is
preinstalled on the cleaner. Failure to use the cloth
filter / prefilter together may cause unusual noise and
heat, resulting in a fire.
CAUTION:
Never pick up water or other liquids or wet
dusts when using the paper pack. Picking up
such things may cause the paper pack breakage.
Before using the paper pack, make sure that
powder filter (optional accessory), damper
(optional accessory) and prefilter are always
used together.
CAUTION:
Before using the paper pack, make sure
that powder filter, damper and prefilter are
always used together.
1.
Remove the rubber holder.
1
► 1. Rubber holder
11 ENGLISH
When using the paper pack, also
(For the cloth filter model)
(For the powder filter model)
1
1
2

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Xcv13Xcv13ptXcv13z

Tabla de contenido