Installing The Water Filter - Makita XCV20 Manual De Instrucciones

4.
Mount the tank cover and lock it.
6
6
6
► 1. Tank cover 2. Powder filter (HEPA) 3. Damper
4. Prefilter 5. Tank 6. Mounting position marking
NOTICE:
Before using the powder filter, make
sure that prefilter and damper are used together. It
is not allowed to install powder filter alone.

Installing the water filter

Optional accessory
NOTICE:
Never pick up water or wet dust without
the float and the cloth filter or the water filter.
NOTICE:
For picking up wet dust, make sure that the
float cage and the float are installed on the cleaner.
NOTICE:
When installing the water filter on the tank,
set it tight at the opening of the tank so that the hook
of the water filter engages the tank opening firmly and
there is no space between the water filter and the tank.
To pick up water or wet dust only, the water filter is more
suitable than the cloth filter.
When installing the water filter, align its mounting posi-
tion marking with the one on the tank.
3
► 1. Water filter 2. Tank 3. Mounting position marking
All manuals and user guides at all-guides.com
NOTE: It is recommended using water filter when
picking up large amount of water repeatedly.
Otherwise vacuum ability may be reduced in case of
cloth filter.
1
Installing the paper pack
2
Optional accessory
WARNING:
make sure that the cloth filter or prefilter is used
3
together. Failure to use the cloth filter / prefilter
together may cause unusual noise and heat, resulting
in a fire.
4
NOTICE:
Never pick up water or other liquids or
wet dusts when using the paper pack. Picking up
such things may cause the paper pack breakage.
NOTICE:
When using the cloth filter, make sure
5
that the float and the float cage are attached on
the tank cover.
NOTICE:
When using the prefilter, make sure
that the powder filter and the damper are used
together.
1. Remove the rubber holder.
1
► 1. Rubber holder
2. Extend the paper pack.
3. Align the paper pack opening with the dust suction
opening of the cleaner.
4.
Insert the cardboard part of the paper pack onto
the holder so that it is positioned at the end beyond the
detent protrusion.
1
1
2
► 1. Paper pack 2. Holder
9 ENGLISH
Before using the paper pack,
2