Blaupunkt St. Louis MP56 Instrucciones De Manejo E Instalación página 48

Changing basic settings in the settings menu
Changing the user-defi ned
colour ( USER)
Two options are available to
change the user-defi ned colour.
Option 1:
➔
Press the softkey
"USER").
➔
Set the desired colour using
7
the softkeys
•
"RED–": Reduces the red
portion.
•
"GREEN–": Reduces the
green portion.
•
"BLUE–": Reduces the blue
portion.
•
"RED+": Increases the red
portion.
•
"GREEN+": Increases the
green portion.
•
"BLUE+": Increases the blue
portion.
The colour of the display
changes accordingly.
Option 2:
➔
Press the softkey
"COL -SCAN").
The display sequentially
shows all colours that can be
displayed.
➔
Press the softkey
"SAVE") or the OK button
select the colour currently dis-
played.
48
:
(next to
<
to .
;
(next to
7
(next to
A
to
➔
Press the softkey
"BREAK") or the ESC button
instead to exit the "COL -SCAN"
menu item without changing
the colour.
Adjusting the display viewing
angle ( ANGLE)
The angle at which the driver
looks at the display is dependent
upon, among other things, the in-
stallation position of the device,
the seating position, and the
physical size of the driver. You
can adjust the display contrast
to your viewing angle as follows.
➔
Press the softkey
"ANGLE").
The "ANGLE" menu item is
fl ashing. The current display
contrast is shown on the main
A
line .
➔
On the rocker switch
or to increase the display
contrast.
➔
On the rocker switch
or to decrease the display
contrast.
You can adjust the display con-
trast in 13 increments from –6
to +6.
Changing the brightness of the
display for day/night (BRIGHT)
See page 21.
<
(next to
@
8
(next to
3
, press
3
, press