Care And Maintenance - TFA Dostmann MAXIM II Manual De Instrucciones

Note:
Before permanently fixing the remote temperature/humidity sensor wall
base, pace all units in the desired locations to check that the outdoor
temperature and humidity readings are receivable. In event that the signal
is not received, relocate the remote temperature/humidity sensor or move
them slightly as this may help the signal reception.

CARE AND MAINTENANCE


Clean the instrument and the transmitter with a soft damp cloth. Do
not use solvents or scouring agents. Protect from moisture.

Remove the batteries if you do not use the product for a lengthy
period.
MALFUNCTION
Problems
No indication on the
thermo-hygro-station
No transmitter reception
Display "---"
No DCF reception
Incorrect display
Troubleshooting

Ensure batteries polarity are correct

Change batteries

Check batteries of external
transmitter (do not use rechargeable
batteries!)

Restart the transmitter and thermo-
hygro-station as per the manual

Choose another place for the
transmitter and/or the thermo-hygro-
station

Reduce the distance between the
transmitter and the thermo-hygro-
station

Check if there is any source of
interference
Time reception setting "ON"


Choose another place for the
thermo-hygro-station

Manual time setting

Wait for attempted reception during
the night

Change batteries
39