Care And Maintenance - TFA Dostmann 30.3030.IT Manual De Instrucciones

POSITIONING THE OUTDOOR TEMPERATURE TRANSMITTER:

CARE AND MAINTENANCE


Clean the instrument and the transmitter with a soft damp cloth. Do not use
solvents or scouring agents.

Remove the batteries if you do not use the product for a lengthy period.
The transmitter is supplied with a holder that may be
attached to a wall with the two screws supplied.
The transmitter can also be positioned on a flat surface by
securing the stand to the bottom to the transmitter.
To wall mount:
1. Secure the bracket onto a desired wall using the screws
and plastic anchors.
2. Clip the remote temperature sensor onto the bracket.
Note:
Before permanently fixing the transmitter wall base, place all
units in the desired locations to check that the outdoor
temperature reading is receivable. In event that the signal is
not received, relocate the transmitter or move it slightly as this
may help the signal reception.
40