Pioneer SVM-1000 Manual De Instrucciones página 33

USING THE JPEG VIEWER
Operating in FADER MODE
Using the JPEG images in the JPEG BOX, a slide show can be
created with transitions between images at chosen intervals. The
channel fader for the assigned channel is used to perform the
transitions.
1 Touch the [FADER MODE] button to select FADER mode.
2 Select the images you wish to use from the JPEG BOX.
Touch multiple images on the screen and their borders will
change to white. Touch again to deselect images.
3 Select the channel to which you wish to assign the images.
Touch the channel select button for the channel to which you
wish to assign the images, and the image at the upper left of
the group of selected images will be displayed on the channel
monitor.
4 Operate the fader.
Each time the channel fader for the assigned channel is raised
from the [0] point, the images will change.
Deleting JPEG files downloaded to the JPEG BOX
1 Touch the [CLEAR] button.
The [CLEAR] button will flash.
2 Touch the images on the screen that you wish to delete.
The instant the image is touched, it disappears from the JPEG
BOX. While the [CLEAR] button is flashing, you may continue
by deleting other images if desired.
• This process does not affect file data on attached SD cards
or USB memory devices.
3 Press the [CLEAR] button once again to leave this mode.
• Usable JPEG files have a maximum size of 7 MB or about 12
MP.
• If the original JPEG file does not fit within 640 x 480 pixels,
the file will be automatically resized to 640 x 480 pixels when
downloaded to the SVM-1000.
33
En