Waeco CoolFreeze CF11 Instrucciones De Uso página 28

Operation
Connecting to a 100–240 V AC mains (e.g. at home or in the office)
D
DANGER! Danger of electrocution
 Never handle plugs and switches with wet hands or if you are
standing on a wet surface.
 If you are operating your cooler on board a boat with an AC
mains connection of 100-240 V from the land, you must install
a residual current circuit breaker between the 100-240 V AC
mains supply and the cooler.
Seek advice from a trained technician.
The cooling device has a built-in multi-voltage mains adapter with a priority
circuit for connecting to a 100-240 V AC supply. The priority circuit automat-
ically switches to mains operation if the appliance is connected to a 100–240
V AC supply, even if the 12/24 V cable is still connected.
➤ Plug the 100–240-V connection cable into the device AC voltage socket
and connect it to the 100–240 V AC voltage mains.
6.5 Secure the cooling device in the vehicle (CF11)
➤ Open the lid of the cooling device.
➤ Place the safety strap into the guide (fig. 4 1, page 4) of the cooling
device.
➤ Close the lid.
➤ Engage the safety strap and tighten it.
28
CoolFreeze
EN