RK Rose+Krieger MultiControl duo Instrucciones De Montaje página 72

7. Working life
Activation of the load resistor (only with
Switching the load resistor on or off with interconnected controllers.
To ensure faultless communication between multiple controllers in one bus
233
network, the first and last controller must be defined with a load resistance.
By pressing the UP and DOWN buttons, the following values can be set:
0 = off (load resistor deactivated)
1 = on (load resistor activated)
Change the position of the decimal point of the height display. By pressing the
UP and DOWN buttons, the decimal point can be shifted to the left or to the
right:
.xxxx
x.xxx
311
xx.xx
xxx.x
xxxx.
xxxx
72
RKMultiControl
quadro):
0
xxx.x