Attaching/Removing The Flash Unit - Leica SF 40 Manual De Instrucciones

ATTACHING/REMOVING THE FLASH UNIT

EN
The description below applies equally, except for switching the
camera off, to attaching to a camera or the pedestal supplied.
Attaching
1. Turn off the camera and flash unit
2. Push the flash unit foot as far as it will go into the camera's
accessory shoe
• The locking pin (
34
) must audibly engage.
5b
In the case of accessory shoes without locking hole, the spring-
loaded locking pin remains in the flash unit's foot so that the
surface is not damaged.
Removing
1. Turn off the camera and flash unit
2. Press the release button ( 5a
camera's accessory shoe
) and pull the flash unit out of the