Storing Your Own Sound Modes - JVC KD-LH3150 Manual De Instrucciones

2
Press the number button to select
the sound mode you want.
• This unit has two sound mode selection
screens. To move to the other screen,
press 5 (up) or ∞ (down).
Ex.: When you press number button 1 to
select "Country"
To cancel the sound mode, select "FLAT" in
step 2 .
Note:
For details about the preset settings of each sound
mode, see page 56.
To exit from the sound mode selection
screen, press EQ (equalizer) repeatedly or wait
for about 5 seconds.
30

Storing your own sound modes

You can adjust the sound modes to your
preference and store your own adjustments in
memory (USER 1, USER 2, and USER 3).
• There is a time limit in doing the following
1
Press 5 (up) or
∞ (down).
2
3
4
procedure. If the setting is canceled before you
finish, start from step 1 again.
Press EQ (equalizer).
The last selected sound mode
is called up.
The next-step-operation
buttons start flashing.
Select the sound mode you want to
adjust.
Ex.: When you select "Country"
Enter the sound adjustment mode.
Make adjustments as you like.
Press ¢ or 4
1)
frequency band—60Hz, 150Hz, 400Hz,
1kHz, 2.4kHz, 6kHz, 12kHz.
The following sound
mode adjustment
screen appears on the
display.
to select the