VATECH Pax-i3D Manual Del Usuario página 27

PaX-i3D Green (PHT-60CFO) User Manual
When you click the CONFIRM button,
■ The READY button will begin blinking to show that it has been activated.
■ The rotating unit will move to its initial scanning position.
■ Three laser beams, Mid-sagittal plane, Frankfurt plane and Canine, will
be activated to facilitate patient positioning. These beams will disappear
after 20 minutes or if the READY button is clicked.
Laser beam On / Off buttons:
: Imaging Program
NOTE
: Control Panel
■ The scan time and DAP (Dose Area Product) values will be shown on the main
display for the selected exposure.
10. Guide the patient to the equipment. Position the patient within the
equipment. For further information about patient positioning, refer to section 3.2
Positioning the Patient.
3 Acquiring PANO Images
25