VATECH Pax-i3D Manual Del Usuario página 66

5 Acquiring CT Images
64
3. Guide the patient out of the equipment.
Always perform the chinrest coordinate adjustment after
the patient is cleared from the equipment.
Failure to do so could result in the physical injury, due to
WARNING
the vertical movement of chinrest to new position reflected
after the 'CONFIRM' button on the SCOUT Viewer is
clicked.
4. Once the imaging has been completed, the resulting image with the SCOUT
feature appears.
The green-colored horizontal line appears on the SCOUT image, when the left
button of the mouse is clicked at the point which you want to move to the center
of the image.
To adjust the image contrast for making the compensating point distinct, you
may adjust the black and white level with the Adjust control on the right of
image.
For details about the SCOUT Viewer, refer to the section
"5.3.2 SCOUT Viewer".
NOTE
5. Upon clicking the CONFIRM button, the SCOUT view screen closed, and the
chinrest moves to newly compensated position vertically.
6. Guide the patient into the equipment again and position the patient.
7. Click the READY button from the GUI.
8. Press and hold down the exposure switch to acquire the CT image: refer to
the section 5.4 Initiating X-Ray Exposure.
If the acquired image is unsatisfactory, you may repeat the
steps above with a different coordinate.
NOTE
PaX-i3D Green (PHT-60CFO) User Manual