Soehnle 7702 Instrucciones De Uso página 29

Press the Zero button to cancel taring.
Tare info
Press the Zero button to display the tare information.
If you press the button briefly, the tare weight is deleted, if you press
and hold until the weight indication flashes, the tare weight is
displayed and not deleted.
Dialysis function (temporary tare function)
The dialysis tare function can be assigned to the Function key.
For Function key settings, see User mode 3710 (see separate description
470.702.099, when needed for using scales or request Soehnle
Industrial Solutions).
Unknown tare values are added to the existing tare value without
changing the net weight display.
When the Function key is pressed, the word "hold" appears on the
display.
Place an additional tare weight or remove the tare weight from the
platform.
Press the Print button to store the new tare weight.
Switching to another unit of weight
Switching between different units of weight must be enabled in
Calibration Mode.
Switching between kg and lb is available in the non-verifiable version
only!
To program the Function key, "Second unit of weight" must be selected
in Setting mode! For Function key settings, see User mode 3710 (see
separate description 470.702.099, when needed for using scales or
request Soehnle Industrial Solutions).
Switching between units:
Press the Function key to switch to the other unit.
29 of 164
www.soehnle-professional.com