Soehnle 7702 Instrucciones De Uso página 31

To end the BMI function unload the scales or press the ON/OFF key.
Neutral measurement
The "Neutral measurement" function can be adjusted, e.g for medicine
dosage based upon body weight.
To program the Function key, "Neutral measurement" must be selected
in Setting mode! For Function key settings, see chapter 1.13 or User
mode 3710 (see separate description 470.702.099, when needed for
using scales or request Soehnle Industrial Solutions).
The factor for entering the specific weight is the quantity of the
measured material relative to the calibrated unit weight (1 kg/1 g/1
lb). Example: Lysis calculation
Entering the conversion factor in Setting mode
Press and hold the Print button then press the On/Off button for 5
seconds until UCAL 1 appears.
Press the Print button to go into UCAL 1.
Using the Function key, scroll back to Position 26
.
Use the Print button in the input field to go into the decimal places.
Set the number of decimal places with the Tare button and Function
key.
Store with the Print button, the display goes to Position 27.
Use the Print button to go into the input field for the neutral
measurement factor.
Using the Tare button and Function key, set a number value in the
flashing space.
You can use the Zero button to move by one decade from right to left.
31 of 164
www.soehnle-professional.com