General Information - SATA Air star C Instrucciones De Servicio

Content [Original Version: German]
1. General information .............101
2. Safety Instructions ...............103
3. Use ......................................105
4. Description ..........................105
5. Scope of Delivery ................105
6. Technical Design .................106
7. Technical Data .....................106
8. First Use ..............................107
Read these operating instructions thoroughly and carefully before com-
missioning and use. Comply with the safety instructions and danger
warnings!
Always make sure that these operating instructions are kept with the
product or keep them easily accessible for everyone at any time!

1. General information

1.1. Introduction
The SATA air star C, in the following referred to as half mask, serves to
supply the wearer with clean breathing air.
1.2. Target group
This operating manual is intended for
■ Painting and varnishing professionals.
■ Trained personnel for varnishing work in industrial and craftman's work-
shops.
1.3. Accident prevention
As a basic principle, the general and specific national accident prevention
regulations must be heeded, together with corresponding workshop and
industrial safety instructions. Users of breathing protection units need a
medical examination to ensure their suitability. In Germany, this is subject
to the "guidelines on the principles for preventive medical check-ups in
the workplace, G 26: users of breathing protection units for work and res-
cue". Furthermore, due consideration must be given to the pertinent regu-
lations as per breathing protection leaflet DGUV rules 112-190.
Read first!
Operating manual SATA air star C
10. Maintenance and repairs ..... 111
11. Care and storage .................112
12. Disposal ...............................113
13. After Sale Service ................113
14. Accessories .........................114
15. Spare Parts .........................114
16. EU Declaration of
Conformity ...........................115
EN
101