Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
English
PROBLEM
Skipping nails.
Intermittent feed.
Nails jam.
Driven nail is bent.
Drives properly during
normal operation,
but does not drive fully
at faster nailing speeds.
CHECK METHOD
Check for proper nails.
Check function of nail feeder
per page 20.
––––––––––
Check position of nail holder
in magazine per page 14 or 16. position.
Piston O-ring cut or heavily
worn?
Check for proper nails.
Driver blade worn?
Check inside diameter of air
hose.
— 24 —
CORRECTION
Use only recommended
nails.
Clean and lubricate.
Use Hitachi pneumatic tool
lubricant.
Adjust nail holder to proper
Contact Hitachi for
replacement.
Use only recommended nails.
Contact Hitachi for
replacement.
Use larger air hose.
Publicidad
Tabla de contenido
