Publicidad
①
①
OPEN
OPEN
6
②
②
OPEN
CLOSE
CLOSE
CLOSE
CLOSE
OPEN
English
TO OPERATE DEMIST SYSTEM
A demist function is incorporated in the shield latch system to allow more
rapid clearing of any interior mist with the shield remaining partially latched.
Push the shield latch lever up to release shield into the demist position to
assist moisture dispersal ①. To close the shield completely, push the shield
down until the latch post fully engages the shield and latch lever captures the
bottom of the shield ②.
TO OPERATE BROWVENTS
The Browvents are operated from fully closed through intermediate, to fully open
positions by simply pulling the vent control down to open, pushing up to close.
TO OPERATE MOUTHVENT
The Monthvent is operated by simply pulling the vent control down to open,
pushing up to close. When the vent control is fully open, air is directed up
along the interior surface of the shield to help prevent fogging ① and when it
is in its mid-way position air is channeled back to further enhance the airflow
around the month and nose to help move hot moist air out faster ②.
TO OPERATE TOP VENTS
Simply push the switches/levers on each vent to open/close the vents.
NOTE:
Do not use oils or waxes to lubricate vents or other moving parts.
If you must lubricate such components, sparingly use the silicone lubricant
supplied with your helmet for eyeport trim dressing.
Publicidad
Capítulos
