IWC Schaffhausen PORTOFINO CUERDA MANUAL MONOPUSHER Instrucciones De Manejo página 21

Pull out the crown to position 3. This will stop the movement. To set the time ac­
curately to the second, it is best to stop the movement as the seconds hand passes
60. Now move the minute hand a few minute strokes beyond the time to be set. Then
position the minute hand by moving it gently backwards until it is exactly above the
correct minute stroke. This ensures that the minute hand begins to move immediately
when you restart the movement. To start the seconds hand, push in the crown to
position 0. When setting the time, please be aware of the date change, which always
takes place at 12 midnight. If this change has already taken place at 12 noon, you
must move the hands forwards by 12 hours.
To set your watch correctly, proceed as follows:
– Wind the watch fully in position 0, to the point at which you feel a distinct resistance
in the crown.
– Pull out the crown to position 2.
– Turn the crown to the left to advance the date display in steps. Set the display to
yesterday's date.
– Pull out the crown to position 3. This will stop the movement. To set the time accur­
ately to the second, it is best to stop the movement as the seconds hand passes 60.
– Turn the hands forwards until the date display changes to today's date. The hands
will now be positioned between 12 midnight and 1 a.m.
– Now turn the hands forwards beyond the approximate time. Then move them back­
wards to the correct time. If you are setting the watch in the afternoon, you must
turn the hands past 12 (noon) again.
– Push the crown back to position 0 to start the movement.
T I M E S E T T I N G
S E T T I N G Y O U R W A T C H C O R R E C T L Y
P O R T O F I N O M O N O P U S H E R
— 2 1 —