• ENGLISH •
ASSEMBLY
WARNING: The bouncer must only be assembled by an adult.
Open the 2 driving system parts and until a "click".
Remove the protective cap (a).
PLEASE NOTE: The protective cap is not a component necessary for the operation of the product, it merely
protects the pin when you disassemble the product.
a
Install the front legs and rear legs (b) by insert the two legs into the upper part tube. When the components
are assembled correctly, the metal pins will slot into the holes on the fixture tubes. At this point you will hear
them click into place.
click!
click!
click!
b
click!
b
19