Feature Guide - Sears Kenmore 664.7512 Serie Manual De Uso Y Cuidado

This Use and Care Guide covers several models. Your model may have some or all of the items listed. Refer to this Use and Care
Guide for more detailed instructions. You can find your model number and serial number on the label, located on the oven frame
behind the top side of the oven door.
Keypad Feature
SETTINGS/CLOCK Clock
SETTINGS/CLOCK Settings
LIGHT Oven cavity light
TIMER SET/OFF Oven timer
START Cooking start
STOP Range function
BAKE Baking and
roasting

FEATURE GUIDE

WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
Instructions
The Clock can use a 12- or 24-hour cycle. See the "Electronic Oven Controls" section.
1. Press SETTINGS/CLOCK until "CLOCK" is displayed.
2. Press START to change the time.
3. Press "3" for AM or "6" for PM.
4. Use the number keypad to set the time of day.
5. Press START to save the setting.
Settings enables you to personalize the audible tones and oven operation to suit your
needs. See the "Electronic Oven Controls" section.
While the oven door is closed, press LIGHT to turn the light on and off. The oven light
will come on when the oven door is opened.
The Timer can be set in hours or minutes up to 9 hours and 59 minutes.
1. Press TIMER SET/OFF.
2. Press the number keypads to set the length of time in hr-min-min. For example, for
2 hours and 45 minutes, enter 2-4-5. Leading zeros do not have to be entered. For
example, for 2 minutes, enter "2."
3. Press TIMER SET/OFF to begin the countdown. If enabled, one tone will sound at
end of countdown.
4. Press TIMER SET/OFF again to cancel the Timer and return to the time of day.
Do not press the Stop keypad because the oven will turn off.
5. If the Timer is running, but not in the display, press TIMER SET/OFF to display the
countdown for 5 seconds.
The Start keypad begins any oven function. If Start is not pressed within 2 minutes after
pressing a keypad, the function is canceled and the time of day is displayed.
The Stop keypad stops any function except the Clock and Timer.
1. Press BAKE.
2. Press the number keypads to set the desired temperature.
3. Press START.
4. To change the temperature, repeat Step 2. Press START.
5. Press STOP when finished.
7