Technical Data - HSM securio AF 300 Instrucciones De Servicio

10 Technical data

Cutting type
Cut size (mm)
Security level DIN 66399
Cutting capacity* (sheets), A4
Weight
Cutting speed
Intake width
Power supply
Power consumption
with max. number of sheets
Energy consumption in standby mode
Operating mode
Ambient conditions in operation:
Temperature
Relative humidity
Height above sea-level (MSL)
Size W x D x H (mm)
Shredded material container volume
* The maximum number of sheets (DIN A4, 70 g/m² or 80 g/m²), fed lengthways, which can be cut in one cycle. The
performance data is determined when the motor is cold and the cutting device is freshly oiled. A weaker mains voltage
or a different mains frequency to the one specifi ed could result in less sheet capacity and increased noise during op-
eration. The sheet capacity can vary depending on the structure and properties of the paper and on the way it enters.
This document shredder meets the applicable harmonisa on legisla on of the European Union:
• Low Voltage direc ve 2006/95/EU
• EMC direc ve 2004/108/EU
• RoHS direc ve 2011/65/EU
The EU declara on of conformity can be requested from the manufacturer.
22
4.5 x 30
P-4 / O-3 / T-4 / E-3
F-1
70 g/m 14 - 16
2
80 g/m 12 - 14
2
20.6 kg
230 V, 50 Hz
SECURIO AF 300
english
Cross cut
1.9 x 15
P-5 / T-5 / E-4 / F-2
9 - 11
8 - 10
20.4 kg
65 mm/s
240 mm
110 V - 120 V, 60 Hz
500 W
< 2 Wh
Continuous operation
-10 °C to +25 °C
max. 90 %, without condensation
max. 2,000 m
395 x 435 x 837
34 l
0.78 x 11
P-6 / F-3
7
6
20.5 kg
220 V, 60 Hz
11/2014