Setting The Timer - Brandt BPI 6420 X Manual De Instrucciones

Burner
Hob
diameter
model
a-b-d-e-f
16 cm
18 cm b-c-d-f-i-j
a-b-d-e-g-f-i-j
21 cm
a-c-e
28 cm
Duozone
c-d
g-h-j
HoriZone
1/2 zone
c-d
When you use maximum power (Boost) on
several burners at once, position your cookware
following the model of your hob as indicated on
the illustrations (3.2.1 - 3.2.2 - 3.2.3 - 3.2.4 -
3.2.5).
= recommended positioning.
= positioning to avoid.
In this way you will avoid automatic power
limitation on one of the burners if positioning is
not optimal.
4
4.1
SWITCHING ON - STOPPING
Switching on:
Press the on/off button (4.1.1) then the
button to select the burner you want (4.1.2).
A 0 is displayed and a beep indicates that the
cooking zone is on. You can adjust the required
power of the burner selected. If the power level
is not set, the cooking zone will be switched off
automatically.
Stopping a zone:
Keep the key corresponding to the required
burner pressed down. A long beep sounds and
the display switches off or the "H" symbol
(residual heat) appears.
General shutdown:
Hold down the on/off button
sounds and the display switches off or the "H"
symbol (residual heat) appears.
4.2
SETTING THE POWER
Press + or - to set the power level from 1 to 9
(4.2.1).
When it is switched on you can move directly to
maximum power "9" by pressing the - button.
Diameter of
Maximum
power of bottom of
burner (Watts)
cookware
2000
10 to 18 cm
2200
2800
11 to 22 cm
3100
12 to 24 cm
4000
15 to 32 cm
Oval, fish
3600
cooker
18 cm, oval,
4000
fish cooker
2800
11 to 22 cm
g-h-j
. A long beep
Power pre-selection: (depending on model)
2 buttons are available for you to access the pre-
set power levels directly:
= Simmering (corresponds to power 4)
BOOST = maximum power (4.2.2)
DUOZONE:
Press the 2 and
time to activate the "duoZone" front and rear
burners together (4.2.3). The
displayed. The power and the timer are set on
the left rear burner's commands, as for a normal
burner. The front left burner's setting is
deactivated.
To deactivate the "duozone" function, press the
or button.
HORIZONE:
Press the button time to activate the
"Horizone" front and rear burners together
(4.2.4). The symbol is displayed. The power
and the timer are set on the rear burner's
commands, as for a normal burner. The front
burner's setting is deactivated.
To deactivate the "Horizone" function, press the
or button.
4.3

SETTING THE TIMER

Each cooking zone has its own timer which can
be adjusted up to 99 minutes. It can be used as
soon as the cooking zone concerned is turned on.
Press the selected burner's
dot is displayed to the right (4.3.1) (depending
on model).
Press+ or - to set the time. It is possible to
directly access 99 minutes by pressing the - key
from the beginning (4.3.2).
When the cooking is finished, 0 is displayed and
a beep sounds for around 20 seconds. To cancel
the timer, press any button for the particular
cooking zone being used.
To stop the timer manually, hold + and - down
at the same time or return to 0 using the -
button. Press to see how much time is left.
buttons at the same
symbol is
button; a light