Call Tones - Topcom TwinTalker 3600 Manual De Usuario

Display
12.6 CTCSS (CONTINUOUS TONE CODED SQUELCH
SYSTEM)
The 2 digit CTCSS code corresponds to a specific tone frequency the radio
emits. Two users, with the same channel and CTCSS set can hear one
another. They will not be able to hear anyone else on the channel unless
the other radios have the same exact CTCSS code enabled. The Twintalker
3600 has 38 CTCSS codes available.
• Press the
display.
• Press the
• Press the
stand-by mode.

12.7 CALL TONES

A call tone alerts others that you want to start transmitting.
12.7.1 Sending a Call Tone
• Press the
seconds on the set channel.
12.7.2 Setting the Call Tone
The Twintalker 3600 has 5 call tones
• Press the
• Press the
• Press the
stand-by mode.
TOPCOM TWINTALKER 3600
- button twice, the CTCSS code will flash on the LCD
- button or the
- button to confirm your selection and return to the
PTT
Any PMR set on the same channel can receive
and listen to the conversation, also when the
other use a CTCSS code.
To disable CTCSS code, set the code to '0'
- button briefly. The call tone will be transmitted for 2
- button three times. C will be displayed.
- button or the
To disable Call Tones, select '0'
- button to confirm your selection and return to the
PTT
TOPCOM TWINTALKER 3600
- button to change to another code.
- button to select another call tone.
9