E N G L I S H
7.5. SOPRO IMAGING SOFTWARE INSTALLATION
•Insert the SOPRO Imaging CD-ROM into the driver. It will be executed automatically.
WARNING:
If the CD-ROM does not execute automatically or if the operating system is prior to Windows XP SP1, follow
the following instructions:
- Go to the Start menu > Execute.
- Type D:\setup.exe (replace D by the letter of the CD-ROM driver).
- And then, click on OK. The file instantly executes. Then follow the steps from the below point.
• A dialog box opens - it is the main menu window allowing the installation of a certain number of programs
related to SOPRO Imaging application.
NOTE:
Clicking on the key "Browse this CD-ROM" accesses a Windows browse window from which it is possible to
consult the whole content of the CD-ROM. At the CD-ROM root, there are the files allowing an automatic
launch and/or a manual setup.
- Located in the directory "Document" and its subdirectories are all the documents about the Sopro Imaging
software, digital x-ray systems, intra oral cameras and SOPROLIFE system. These documents are in PDF
format. Be sure to correctly install Acrobat Reader in case of reading difficulties.
- The Drivers directories contain the drivers necessary for the use of hardware accepted by SOPRO Imaging
(Sopix system, SOPRO cameras in USB 1 and USB 2, Hasp protection key).
-The directory SOPRO Imaging contains the SOPRO Imaging installation program.
- The directory "Tools" contains
• Click on "Install SOPRO Imaging". A window displays; select the desired language during the installation
process.
• A dialog box opens - it displays the software license to be entirely read to continue the installation. Once
the
terms are read, click on "Next".
• By default, the SOPRO Imaging software will automatically install in the directory "C:\Program Files\SOPRO
Imaging". To start installing the software, click on "Next".
• Once the installation is completed, a dialog box displays. Click on "Finish".
14
S O P R O L I F E • U s e r ' s m a n u a l