Technical Data - HSM SECURIO C18 Instrucciones De Servicio

9 Technical data

Cutting type
Cut size (mm)
Security level DIN 66399
Cutting capacity* (sheets), A4
Noise level (Idle running/ load)
A-weighted sound power level (LWAd in
idle mode)
Weight
Intake width
Cutting speed
Power consumption
with max. number of sheets
Energy consumption in standby mode
Ambient conditions in operation:
Temperature
Relative humidity
Height above sea-level (MSL)
Size W x D x H (mm)
Shredded material container volume
Power supply
Operating mode
Operating time
Idle time
* The maximum number of sheets (DIN A4, 70 g/m² or 80 g/m²), fed lengthways, which can be cut in one cycle. The
performance data is determined when the motor is cold and the cutting device is freshly oiled. A weaker mains voltage
or a different mains frequency to the one specifi ed could result in less sheet capacity and increased noise during op-
eration. The sheet capacity can vary depending on the structure and properties of the paper and on the way it enters.
This document shredder meets the applicable harmonisa on legisla on of the European Union:
• Low Voltage direc ve 2006/95/EU
• EMC direc ve 2004/108/EU
• RoHS direc ve 2011/65/EU
The EU declara on of conformity can be requested from the manufacturer.
16
Strip cut
5.8
P-2 / O-2
T-2 / E-2
70 g/m 2 19 - 20
80 g/m 17 - 19
2
55 - 58 dB(A) / 55 - 59 dB(A)
4.6 kg
215 - 240 V, 50 Hz
220 V, 60 Hz
Brief operation
7 min
16 min
SECURIO C 18
english
3.9 3.9 x 30
P-2 / T-2 / E-2 P-4 / T-4 / E-3
F-1
14 - 16 10 - 11
13 - 15 8 - 9
55 - 58 dB(A) / 57 - 63 dB(A)
57.5 dB
230 mm
54 mm/s
360 W
< 2 Wh
-10 °C to +25 °C
max. 90 %, without condensation
max. 2,000 m
365 x 280 x 542
25 l
110 - 130 V, 60 Hz
Continuous operation
Cross cut
1.9 x 15
P-5 / T-5 / E-4
F-2
7
6 - 7
5.2 kg
-
-
12/2014