2- Indicator Lights - Honeywell Domonial Manual De Uso

2- Indicator lights

The front cover of the control panel features LED indicators which show the status of your security
system.
1- LED INDICATOR "AC MAINS POWER"
: The Control Panel is supplied from the Mains.
ON
: There is a mains power failure - The control panel is supplied by
OFF
its built–in battery.
2- LED INDICATOR "SYSTEM ARMED"
: The system total set is armed.
ON
: The system is disarmed.
OFF
: The system part or annex set is armed.
FLASHING
3- LED INDICATOR "DETECTOR ACTIVATED"
: One of the window or door protected by a
FLASHING
magnetic contact is opened. It flashes until the window or door has
been closed.
4- LED INDICATOR "ALARM MEMORY"
: An intruder alarm occurred while the system was armed.
ON
: An alarm occurred while the part set or annex set
FLASHING
was armed.
The indicator remains
ON
5- LED INDICATOR "TECHNICAL FAULT"
: A fault on a technical channel.
ON
: A fault on the system.
FLASHING
(Battery, Supervision, Tamper, Phone line failure or Radio jamming)
The indicator remains
ON
until the next arming.
or until the condition has been cleared.
FLASHING
- 3 -
E
N
G
L
I
S
H