Safety Advice Concerning The Face Shield/ Sun Visor - SCHUBERTH C4 Manual Del Usuario

Examine the helmet for damage at regular intervals. Small scratches will
not impair the protective function of your helmet.
The helmet should be replaced after 5 to 7 years, depending on use and
care. Although the outer shell is in principle capable of a longer service life,
the occurrence of material fatigue and wear to other components, as well
as the overall action of the helmet and the unknown conditions in which
the helmet has been used, make it advisable for your own safety to replace
the helmet after this period of use.
Excessive heat (e.g. exhaust heat) can cause damage to the decoration,
the inner shell of the helmet and the interior lining.
Direct contact with motor fuel, thinners or solvents can destroy the
structure of the inner and outer shell. Make sure the helmet does not
come into contact with such substances, even for cleaning purposes.
2. SAFETY ADVICE CONCERNING THE FACE SHIELD/
SUN VISOR
The protective film used during shipping should be removed before use.
Any scratches and/or dirt arising from the use of the face shield and/or
sun visors significantly impair your vision in any driving situation and thus
increase the risk of an accident. For your own safety, replace them or
clean them immediately.
Never use a tinted face shield or sun visor in conditions of poor visibility, at
night or in a tunnel!
Benzine, solvent and fuel vapour can cause cracks in the face shield. Keep
the face shield away from such vapours and do not allow these kinds of
substances to come into direct contact with the face shield! Never place
the helmet on the tank of your motorcycle.
Make sure the face shield is always in perfect condition. Don't ride when
visibility is poor!
EN
81