Visor And Sun Visor Safety Information - SCHUBERTH C3 Manual De Uso

F. FOR YOUR SAFETY
Depending on intensity of use and the care it is given, the helmet
should be replaced after 5-7 years. Although the outer shell is suitable
in principle for a longer period of use, we recommend that, owing to
the fatiguing and wear of the materials of other components and of
the overall system of the helmet's functioning, together with unknown
framework conditions during use, you replace the helmet after the time
indicated above for your own safety.
Exposure to intense heat (e.g. from exhausts) may damage the finish,
the inner shell and the internal elements!
Direct contact with fuels, solvents and thinners may damage the
structure of the inner and outer shells. Do not allow the helmet to come
into contact with such substances – not even for cleaning purposes.

2. VISOR AND SUN VISOR SAFETY INFORMATION

Remove the protective film provided for transport from the visor
before using.
Any scratches and/or dirt on the visor and/or sun visor will be seriously
detrimental to vision in any traffic situation and increase the risk of
accident. For your own safety you should replace or clean the visor as
appropriate immediately.
Petrol, solvent and other fuel vapors may cause cracks to appear in the
visor. Do not expose the visor to these vapors or allow it to come into
contact with such substances. You should therefore never place the
helmet on the fuel tank of your motorcycle.
68
3. SAFETY INFORMATION FOR MODIFICATIONS
AND ACCESSORIES
The original components of the helmet (particularly on the outer and
inner shells and the restraint system) must not be modified or removed.
The attachment of additional non-recommended third-party parts may
compromise the protective function of the helmet and render null and
void the ECE approval as well as any warranty and insurance claims.
Use only accessories and spares that are expressly approved by
SCHUBERTH for your helmet!
EN
69