Connecting The Water Supply - Maytag Ice2O MFI2568AEB Guía De Uso Y Cuidado

Installation
To Install:
1. Align door handle clips
to the studs attached to
the freezer door.
2. Ensure the large hole in
the mounting clip is
positioned to the right
on both ends of the
handle.
3. Rotate the handle so that the handle is flat against
the door.
4. Grasp the handle firmly and slide handle to the
right.
To Remove:
1. With both hands, firmly grasp the handle toward
the right side.
2. Slide toward the left, lift and remove from the
surface.
Connecting the Water Supply
Metal Handle
Materials Needed:
• %2"Allen wrench
• Gloves to protect hands
I Note:
Metal handles can scratch doors.
To Remove:
• Loosen set screws in
handle using 3/_2" Allen
wrench.
• Repeat the procedure on
all screws.
To Replace:
• Align handle with the
mounting posts.
• Fully tighten all set
screws to secure handle
in place.
I