General Criteria For The Site Selection - Eaton xChargeIn Manual De Instalación

xChargeIn
Fig. 6-12: Water drainage
Caution
Risk of breaking the plastic housing!
● Countersunk screws may not be used for the mounting.
● 4 of the supplied washers must be used under the nuts.
● Do not tighten the mounting screws with force.
● The mounting surface must be completely flat. Warpage of the housing
● If adjustment is necessary, the remaining 4 washers supplied must be
6.1

General criteria for the site selection

The charging station was constructed for the indoor and outdoor area. Ac-
cordingly, it is necessary to ensure the correct set-up requirements and the
protection of the device at the installation site.
The following criteria must be taken into account when selecting a location:
●
●
●
Installation manual V1.01
© EATON
must be prevented.
used.
Take into account the local electrical installation regulations, fire preven-
tion measures and accident prevention regulations as well as emer-
gency routes at this site.
The charging station may not be installed in potentially explosive atmos-
pheres (EX environment).
The charging station may only be installed in stationary applications.
Mounting and installation instructions
23