Headboard Brackets - Serta motion plus Manual De Uso

headboard bracket installation guide (optional)
A 9/16" & 1/2" socket and crescent wrench are necessary to complete installation.
Headboard Bracket (2)
STEP 1
a.) Align the hole in the bracket to the brass sleeve into which
the leg threads. Hold the bracket in place and screw the leg
into the base until it is snug. DO NOT OVERTIGHTEN. Too
much force may cause the leg to spin freely.
b.) Align the tab with the hole in the frame (located towards the
foot of the base) and use a short bolt and nut to secure the
bracket. Make sure the bolt is tight.
16
Use of Headboard Brackets is optional.
HEADBOARD BRACKET COMPONENTS
T-Bracket (2) Spacer (2) Long Bolt (8) Short Bolt (10)
b
Nut (18)
a