Serta motion plus Manual De Uso página 19

headboard bracket installation guide
A 9/16" & 1/2" socket and crescent wrench are necessary to complete installation.
STEP 2
Attach the plastic spacer and T-Bracket.
a.) Measure the distance between the mounting holes on the
headboard and install the spacer and attachment plate to
accommodate the headboard.
b.) To install the plastic spacer and attachment plate, you will
need two (2) long bolts and two (2) nuts. Place the spacer
and attachment plate in the desired location and slip the
bolts through the holes with the head of the bolt facing
outward. Position the bolts diagonally on the spacer. Use
the 9/16" socket and wrench to tighten the bolts.
Use of Headboard Brackets is optional.
STEP 3
You may now connect your headboard to the attachment plates
using the remaining short bolts and nuts to secure it to the
brackets. The heads of the bolts will face outward. Use a 9/16"
socket and 1/2" wrench to tighten the bolts.
17