Re-Tuning The Same Programme Automatically; Alternative Frequencies (Af) - Sony XR-1800R Manual De Instrucciones

Changing the display item
Each time you press (DSPL), the displayed
items change as follows:
z Frequency z Time z Station name
Note
"NO NAME" lights up if the station received does
not transmit RDS data.
Re-tuning the same
programme automatically

— Alternative Frequencies (AF)

The Alternative Frequencies (AF) function
automatically selects and re-tunes the station
with the strongest signal in a network. By
using this function, you can continuously
listen to the same programme during a long-
distance drive without having to re-tune the
station manually.
EN
Frequencies change automatically.
98.5 MHz
Station
1
Select an FM station.
2
Press (AF/TA) until "AF" lights up on the
display.
The unit starts searching for an alternative
station with a stronger signal in the same
network.
Note
When there is no alternative station in the area,
and you don't need to search for an alternative
station, turn the AF function off by pressing
(AF/TA) until "AF" disappears.
10
96.0 MHz
102.5 MHz
Changing the display item
Each time you press (AF/TA), the displayed
items change as follows:
z AF ON z TA ON z AF TA ON* z AF TA OFF
Blank Z
* Select this to turn on both AF and TA functions.
Notes
• "NO AF" and the station name flashes
alternately, if the unit cannot find an alternative
station in the network.
• If the station name starts flashing after selecting
a station with the AF function on, this indicates
that no alternative frequency is available. Press
(SEEK/MANU) while the station name is flashing
(within eight seconds). The unit starts searching
for another frequency with the same PI
(Programme Identification) data ("PI seek"
appears and no sound is heard). If the unit cannot
find another frequency, "NO PI" appears, and the
unit returns to the originally selected frequency.
Listening to a regional programme
The "REG" (regional on) function of this unit
lets you stay tuned to a regional programme
without being switched to another regional
station. (Note that you must turn the AF
function on.) The unit is factory preset to
"REG" but if you want to turn off the function,
do the following.
Press (AF/TA) for more than two seconds
until "REG" disappears.
Note that turning the "REG" function off
might cause the unit to switch to another
regional station within the same network.
Note
This function does not work in the United
Kingdom and in some other areas.