Invacare Perfecto2 Serie Manual Del Usuario página 20

Invacare® Perfecto₂™Series
1. Remove cap from bottle.
2. Fill humidifier with boiled tap water or bottled water to the level
indicated by the manufacturer. Boil tap water for approximately
10 minutes and cool to room temperature prior to use.
3. Insert a flathead screwdriver in the plate groove on the top edge
of the filter access door C and gently pry the filter access door
off.
Pull up and remove the humidifier bottle adapter B.
4.
20
5. Replace the filter access door and install the air scoop F onto
the filter access door by inserting the six tabs G on the air scoop
into the six slots D on the sides of the filter access door.
Attach the humidifier bottle adapter to the humidifier bottle H by
6.
turning the wing nut on the humidifier bottle counterclockwise
until it is securely fastened.
1163146-H~07