Automatic Time Limitation; Basic Settings - Bosch NIT8665UC Manual De Instrucciones

Automatic time limitation

If the element is used for prolonged periods of time
without changes in the settings being made, the
automatic time limitation function is triggered.

Basic settings

The device has various basic settings. These settings
may be adapted to the user's individual needs.
Display Function
Automatic child lock
™‚
Off*
‹
On
‚
Sound signals
™ƒ
Confirmation beep and error signal off
‹
Only confirmation beep off
‚
All signals on*
ƒ
Automatic timer
™†
Off*
‹
- Automatic shut-off time
‚ ŠŠ
Duration of the timer end signal
™‡
10 seconds*
‚
30 seconds
ƒ
1 minute
„
™ˆ Power Management function
= Off*
‹
‚ = 1,000 W. minimum power
.= 1,500 W
‚
= 2,000 W
ƒ
etc.
or . = maximum power of the element
Š Š
Element selection time
™Š
Unlimited: the last programmed element remains selected*
‹
Limited: The element will only remain selected for 10 seconds
‚
Restoring default cooktop settings
™‹
Customized settings*
‹
Return to factory settings
‚
*Factory settings
Changing the basic settings
The cooktop should be turned off.
Turn on the cooktop with the main switch.
1.
Within the next 10 seconds, touch the Timer key until
2.
you hear a sound signal.
and on the right side of the display.
‹
lights up on the left side
™‚
The element stops heating.
indicator / flash alternately in the display.
• œ
The indicator goes out when any symbol is pressed. The
element can now be reset.
When the automatic time limitation is activated depends
on the selected heat level (from 1 to 10 hours).
and the residual heat
"‰
17