Adjust Contrast; Reset; Discrete I/O - OHAUS Defender 5000 Manual Del Usuario

Defender 5000 Indicators

3.5.8 Adjust Contrast

Set the contrast degree of the display.
1
2
3
4
5

3.5.9 Reset

Reset all settings to factory default settings.
Yes = Reset.
No = Do not reset.
NOTE: If the Security Switch is set to ON, Stability, Zero Range, Filter Level and Auto Zero Track
settings are not reset.

3.6 Discrete I/O

Long press the button
Menu.
Select Application Mode by pressing the Softkey
corresponding to the icon
Press the Softkey corresponding to the icon
enter the sub-menu Application Mode.
Enable
The current selected application mode can't be set Off.
Discrete I/O setup menus allow the configuration of 2 inputs and 4 outputs depending on different
application mode.
Reset
If Reset is selected and confirmed, all the submenu value will be set to default.
to enter the Main
.
to
EN-25