Operation; Weighing; Application Setup; Auto Tare - OHAUS Defender 5000 Manual Del Usuario

Defender 5000 Indicators

4. OPERATION

The scale can be configured to operate in up to 5 Application modes (Scale can be set to have 1 or
more Applications modes active). Press the button Mode to select an activated application. The
current application will be shown in the upper left corner of the home screen.
TD52 Indicator incorporates the following Applications:

Weighing

4.1 Weighing
Use this application to determine the weight of items in the selected unit of measure.
Press the button
corresponding to Weighing is displayed in the
screen (this application is the default).
Press Tare or Zero if necessary to begin.
Place objects on the pan to display the weight. When
the reading is stable, the * appears.
The resulting value is displayed in the screen in the
active unit of measure.

4.1.1 Application Setup

The Application can be customized for various user preferences.
Press the button corresponding to the icon
The Configuration screen is now displayed.
Select the list item and press the Softkey
corresponding to the icon
setting as desired.
To return to the Application home screen, press
the Softkey corresponding to the icon
The Weighing Configurations are defined below (defaults in Bold)
Item Available Settings

Auto Tare

On, Off
Accumulate Off , Automatic, Manual
4.1.2 Auto Tare
Set the automatic tare.
Off: Auto tare is turned off.
On: The first stable weight (>=5d) will be tare as a
container automatically.
Note: If the Security Switch is set to ON, Auto
Tare is locked at the current setting.
Counting Check
Weighing/Counting
until the
to change the
.
Comments
To enable Automatic Tare
To enable Accumulation / Totalization
Percent
icon
to enter Configuration
EN-33
Dynamic
.