Accumulation; Id Input - OHAUS Defender 5000 Manual Del Usuario

EN-34

4.1.3 Accumulation

To start Accumulate weighing data, place the
object on the pan and press the Softkey
corresponding to
accumulation icon will start blinking. The load to be
accumulated has to be >= 5d and the next
accumulation can only start once the pan has been
cleared.
When LFT is ON (no such limit when LFT is OFF
or the approved model is OIML),
a. gross weight and net weight cannot be
accumulated;
b. gross 0 has to be reached before a new sample
accumulation.
When LFT is OFF,
a. gross weight and
accumulated;
b. a new sample can be accumulated after
reaching gross 0 or net 0.
Note: The Accumulation icon
shown if Accumulate is set to Manual and
Automatic (see section 4.1.1).
Viewing the Accumulation Results
To view the accumulation results, press the
Softkey corresponding to the icon
The Accumulate Result screen is displayed.
To clear the accumulation results, press the button
.
When the instructional message "Clear the
statistical data?" appears, press the Softkey
corresponding to the icon
To return to home screen press the Softkey
corresponding to the icon
Press the button Print to print Accumulation result.

4.1.4 ID Input

Press Softkey corresponding to the icon
enter configuration screen.
User can press alphanumeric keys to input the ID
number. Then press the Softkey corresponding to
the icon to confirm the input.
the icon .
net weight can be
will only be
.
.
.
The
to
Defender 5000 Indicators