Accumulation; Input/Output (I/O) Setup - OHAUS Defender 5000 Manual Del Usuario

EN-38
The Counting Configurations are defined below (defaults in Bold).
Configure Item Option(Bold is
default)
Auto Tare Off/On
Accumulate Off/
Manual/
Automatic
Auto Opt. Off/On
Opt. Beep Off/On
Off/On
APW Auto Save
Off/On
Internal Resolution
Reference Size 10

4.2.3 Accumulation

See section 4.1.3 for details about the Accumulation feature.

4.2.4 Input/Output (I/O) Setup

The I/O's setup can be customized for various user preferences.
The I/O's setup is defined below (defaults in Bold).
Item
Enable
Discrete Input 1
Discrete Input 2
Discrete Output 1
Discrete Output 2
Discrete Output 3
Discrete Output 4
Note: The I/O's will only work when the I/O Option Board has been installed. The option I/O board
provides two isolated inputs and four dry-contact normally open relay outputs which can be used for
simple process weighing.
Description
Off: Auto tare is turned off.
On: The first stable weight (>=5d) will be tared as a container
automatically.
Off: The icon "∑" does not display.
Manual: The Softkey "∑" displays. User can press the key to
accumulate the stable weight.
Automatic: The icon "∑" displays. The weight will be accumulated
automatically.
Note:
The load to be accumulated has to be >= 5d and the next accumulation
can only start once the pan has been cleared.
When LFT is ON (
mod is OIML
a. gross weight and net weight cannot be accumulated;
b. gross 0 has to be reached before a new sample accumulation.
When LFT is OFF,
a. gross weight and net weight can be accumulated;
b. a new sample can be accumulated after reaching gross 0 or net 0.
Off: Auto Opt. is off.
On: The APW will be optimized automatically during count weighing.
Off: Opt. Beep is off.
On: When the APW has to be optimized, the beeper will beep once.
Off: APW Auto Save is off.
On: If the APW is derived from sampling, and a counting library is
selected, the new APW will be saved to library after optimized.
Note: It will be hidden when "Auto Opt." is off.
Off: Internal Resolution is off.
On: During sampling or weighing, the internal resolution will be used.
The One Button Sampling PCS is from 0 to 999, the default is 10.
0: The One Button Sampling key will be hidden.
Available Settings
On, Off
Off, Zero, Tare, Clear Tare, Print, Unit, Accumulate
Off, Zero, Tare, Clear Tare, Print, Unit, Accumulate
Off, Overload, Underload
Off, Overload, Underload
Off, Overload, Underload
Off, Overload, Underload
Defender 5000 Indicators
no such limit when LFT is OFF or the approve
),