● Um eine optimale Reinigung
der Sprühgeräte zu erreichen, ist der
Einsatz von
Brill
tivkohle, Art.-Nr. 263.0000, empfeh-
lenswert..
● Bei Reparaturen nur Original Ersatzteile
verwenden.
● Reparaturen nur durch Servicestationen
des Herstellers durchführen lassen.
Technische Änderungen vorbehalten!
GB
Important Safety
Instruction
Repairs of
Brill
GLORIA house and gar-
dening equipment are only to be done by
Brill
GLORIA after-sales-services. Spare
parts should be ordered by
special trade. If parts are out of stock, the
special trade will get them as quick as
possible.
● These
Brill
GLORIA "pressure sprayer", oil
resistant, art.-no. 90.0000, is designed to
spray liquids and are suitable for private,
professional and industrial applications.
● Use only unadulterated, commercially
available products for spraying. Mixing dif-
ferent products may result in unforesee-
able, dangerous chemical reactions. Do
not fill the tank with alkaline substances
with a pH value ≤ 5 or with solvents or
highly corrosive agents.
4
GLORIA-Spezial-Ak-
Brill
GLORIA
● Safety notices provided by the manufac-
turer of the liquid being sprayed are to be
heeded. Some spray units require the use
of breathing masks, protective glasses,
protective gloves or other precautionary
measures.
● Do not use flammable explosive com-
pounds. Exception: in areas where there
is no danger of explosion. Then comply
with the pertinent regulations governing
explosive and/or flammable fluids.
Keep away from sparks. Do not smoke
when using. Use spray unit only in well
ventilated places.
● Check that spray unit functions properly
before each use, especially that the screw
terminal and screwed connections are
tight. Check material for cracks, brittle-
ness and corrosion.
● Do not expose the filled tank to strong
sunshine for any long period of time. Op-
erating temperatures must not exceed
40 °C. Protect unit against frost.
● Clean tank thoroughly immediately after
use and then dry completely.
● As far as possible, apply environmentally
harmful agents as close to the target as
possible (direct application), and store any
unavoidable
residue in an appropriate container until it
can be properly disposed of. With pollut-
ing substances, the regional legislation
must be observed.
● Follow the instructions provided by the
manufacturer of the agent being sprayed.
If necessary wear protective clothing.