Time Synchronisation; Time Synchronization Via Mennekes Charge App; Time Synchronization In The Service Interface; Mennekes Charge App - Mennekes AMTRON Xtra Manual De Instalación

6.6 Time synchronisation

During the initial setting-up process and after a power
failure of more than four hours, a clock synchronisation is
necessary.
The time synchronization can be carried out via
MENNEKES Charge APP or via the service interface.

6.6.1 Time synchronization via MENNEKES Charge APP

Time synchronisation with smart phone / tablet over the
charge app takes place automatically as soon as a connec-
tion to the MENNEKES Charge APP has been established.
There is no need for further action.

6.6.2 Time synchronization in the service interface

The time synchronization is carried out in the service
interface in "User Settings" > "Wallbox Date and Time
Configuration".
„ The data of the Internet browser is accepted in
"Alignment with Browser Time".
„ In "Manual Configuration", the data is entered manually.
The "Timezone Offset" is the difference between
the local time zone and the Coordinated
Universal Time (UTC) in minutes.
Example for Germany and Central Europe
The deviation of the local time zone from UTC is
1 hour, so the "Timezone Offset" parameter must
be set to 60 minutes.
28

6.7 MENNEKES Charge APP

You cannot use the device with the MENNEKES
Charge APP in "SCU" mode.
The device is operated with a mobile device (smartphone,
tablet) via the MENNEKES Charge APP. You can remotely
control the device and start or stop the current process
at any time. All information about the current load is dis-
played.
A functional description of the
MENNEKES Charge APP can be found
in German on YouTube under
"MENNEKES Charge APP".
Requirements:
To connect the MENNEKES Charge
APP with the device, the following
requirements must be met:
„ Your mobile terminal has the operating system IOS or
Android.
„ Installation of the MENNEKES Charge APP on the
mobile terminal. This is available for free from the Apple
App Store and the Google Play Store.
„ The device is switched on and ready for use.
For terminals with Android operating systems,
you may need to disable mobile network data
services.
Fig.: 19. Video
"MENNEKES Charge
APP" (English)