Connection To The Device; Maintenance - Mennekes AMTRON Xtra Manual De Instalación

6.7.2 Connection to the device

Automatic connection
f Open MENNEKES Charge APP.
f Tap "Search for Wallbox" to find the devices on your
network.
f If the desired device has been found, select it using the
serial number (SNR) (setup data sheet).
f Enter PIN1 (APP PIN) of the device and change the
name if necessary.
f Confirm the entry with "Save".
Manual connection
In rare cases, the device will not be detected automatically.
You can then connect the device manually.
f Touch "Set up manually".
f Enter the IP address and the respective PIN1 (APP PIN)
of the device and change the name if necessary.
„ IP address as access point: 172.31.0.1
„ IP address for integration in the home network: depend-
ing on configuration
Î"6.3.2 Integrating into the home network"
f Confirm the entry with "Save".
30

7. Maintenance

T
T
DANGER
Electric shock hazard when devices are damaged
Use of a damaged device may result in electric shock.
f Do not use the device if it is damaged.
f Mark the damaged device to ensure that no one contin-
ues using it.
f Eliminate damage immediately.
f Stop the device if necessary,
Recommended maintenance intervals
Testing intervals of charging infrastructure for electric vehi-
cles based on DGUV (German Social Accident Insurance)
regulation 3.
Component Maintenance work
Daily / At every charging
Device Visual inspection
for defects
Control of opera-
tional readiness
Every 6 months
Residual cur- Function check
rent device
Charging Repeat the meas-
cable urements and tests
according to VDE
0701/702
Once a year
Device Repeat the meas-
urements and tests
according to VDE
0105-100
f Document maintenance sufficiently.
f If necessary, request maintenance protocol from
MENNEKES support.
Î "1.1 Service"
A maintenance contract ensures a regular check.
Person
responsible
User / Owner
Owner
Operator / electri-
cian
Electrician
Electrician