Cut To Edge; Working Schedule - Worx Landroid S Basic Manual Del Propietário

E1

5.3 Cut to edge

Off-centered Blade Turning Disc (13) design provides a clean cut
with narrowest distance to the boundary or wall. It helps minimize
the amount and frequency of manual trimming along the boundary.
®
Additionally, the Landroid is designed with a protective cover
underneath that prevents objects from touching the turning blades
and/or injury. (See Fig. F)

5.4 Working Schedule

(1) Default Working Schedule
9:00~11:00 everyday (including charging time)
Everyday
2hrs
(2) Tall grass working schedule
For the first mowing when the grass grows very tall after winter or a long holiday, you can change it to tall grass mowing
mode by keep pressing
®
Landroid will resume to previous start time and the default working duration in the following days.
(3) Change default start time
The default start time of 9:00 can be changed to anytime by keep pressing both
for 3 seconds until a beep sound is heard.
For example, keep pressing both
16:05.
Owner's Manual of Lawn Mowing Robot EN
button for 5 seconds until a beep sound is heard. Press
Day 1
Day 2
2hrs
Day 3 2hrs
and buttons at 14:05, and your Landroid® will be mowing from 14:05 to
E2
"Cut to Edge" Tech
F
10hrs
then to start mowing.
and buttons at the same time
11