Environmental Protection - Worx Landroid S Basic Manual Del Propietário

®
Landroid runs outside the
boundary wire. Landroid
not mow an area within a
boundary wire zone. Landroid
reverses or rotates erratically
near the boundary wire.
®
Landroid wheels skid or damage
lawn.
®
Landroid exits the boundary
wire due to high speed when
going down a hill.

Environmental Protection

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling advice.
20
Owner's Manual of Lawn Mowing Robot EN
The boundary wire of another Landroid
or another robotic mower is positioned
too closely.
The boundary wire has been installed
with tight corners.
®
does
In wet conditions, the boundary wire
®
electric signal may leak where wire has
been joined or repaired.
There is boundary wire electric signal
leakage due to broken insulation.
The cutting area is larger than the
allowable cutting area for Landroid
Foreign obstacles, such as twigs
and branches may be lodged under
®
Landroid .
The lawn is too wet.
The Boundary Wire is placed on a slope
steeper than 17% (10°).
®
Ensure your Landroid
least 1m of space between the neighboring
boundary wire.
Check the boundary wire to ensure the
corners are smooth.
Check boundary wire joints. Insulate to
provide a fully waterproof connection.
Repair damaged boundary wire insulation
with connectors.
Contact service agent.
®
.
Remove foreign objects from underside of
®
Landroid .
Wait until lawn has dried.
Reposition the Boundary Wire away from
slopes that are steeper than 17% (10°).
Please refer installation manual for details.
®
Boundary Wire has at