Information Displayed During Operation; Technical Data - Hilti PM 40-MG Manual De Instrucciones Original

receiver mode and is then compatible with the PMA 31G laser receiver. Receiver mode can be deactivated
by again pressing and holding the selector button for a short time or by switching the tool off.
3.4 Items supplied
Multi-line laser, toolbox, operating instructions, manufacturer's certificate.
You can find other system products approved for your product at your local Hilti Center or online at:
www.hilti.com
3.5

Information displayed during operation

Status
The laser beam blinks twice every 10 seconds
(pendulum not locked) or every 2 seconds (pen-
dulum locked).
The laser beam blinks five times and then remains
permanently on.
The laser beam blinks very rapidly.
The laser beam blinks every 5 seconds.
4

Technical data

Range of the lines and intersection
point without laser receiver
Range, lines and intersection point
with laser receiver
Self-leveling time (typical)
Laser class
Line width (distance 5 m)
Self-leveling range
Accuracy
Operating status indicator
Power source
Battery life (all lines on)
Battery life (horizontal or vertical
lines on)
Operating temperature
Storage temperature
Dust and water spray protection
(except battery compartment)
Tripod thread
Beam divergence
Average output power (max.)
Weight including battery
*2171411*
Meaning
The batteries are almost exhausted.
Activation or deactivation of receiver mode.
The tool cannot level itself.
Inclined line operating mode; the pendulum is
locked, so the lines are not leveled.
20 m
(65 ft - 10 in)
2 m ... 50 m
(6 ft - 10 in ... 164 ft)
3 s
Class 2, visible, 510-660 nm (EN 60825-1:2008 / IEC 60825-
1:2007); Class II (CFR 21 § 1040 (FDA))
< 2.2 mm
(< 0.09 in)
±3.0° (typical)
± 2 mm in 10 m
(± 0.1 in in 32 ft - 10 in)
Laser beams and the switch positions "Off", "On locked" and
"On unlocked"
Hilti B 12 Li-ion battery
Hilti B12 Li-ion battery, 2600 mAh, temperature +24 °C (+72 °F):
7 h (typical)
Hilti B 12 Li-ion battery, 2600 mAh, temperature +24 °C (+72
°F): 10 h (typical)
−10 ℃ ... 40 ℃
(14 ℉ ... 104 ℉)
−25 ℃ ... 63 ℃
(−13 ℉ ... 145 ℉)
IP 54 in accordance with IEC 60529
BSW 5/8"UNC1/4"
0.05 mrad ... 0.08 mrad
< 0.95 mW
1.24 kg
(2.73 lb)
2171411 English 15