Information Displayed During Operation; Technical Data - Hilti PM 30-MG Manual De Instrucciones Original

Other system products approved for use with this product can be found at your local Hilti Store or online at:
www.hilti.group.
3.5

Information displayed during operation

Status
The laser beam blinks twice every 10 seconds
(pendulum not locked) or every 2 seconds (pen-
dulum locked).
The laser beam blinks five times and then remains
permanently on.
The laser beam blinks very rapidly.
The laser beam blinks every 5 seconds.
4

Technical data

Range of the lines and intersection point with-
out laser receiver
Range, lines and intersection point with laser
receiver
Self-leveling time (typical)
Self-leveling range
Accuracy
Line thickness
Laser class
Operating status indicator
Power source
Battery life (all lines on)
Battery life (horizontal or vertical lines on)
Operating temperature
Storage temperature
Dust and water spray protection (except bat-
tery compartment)
Tripod thread
Beam divergence
Average output power (max.)
Weight including battery
5 Operation
CAUTION
Risk of injury! Do not direct the laser beam toward persons.
▶ Never look directly into the source of the laser beam. In the event of direct eye contact, close your eyes
and move your head out of the path of the laser beam.
5.1 Charging the battery
1. Before charging the battery, read the operating instructions for the charger.
2. Make sure that the contacts on the battery and the contacts on the charger are clean and dry.
3. Use an approved charger to charge the battery.
*2243556*
Printed: 08.05.2019 | Doc-Nr: PUB / 5492771 / 000 / 00
Meaning
The batteries are almost exhausted.
Activation or deactivation of receiver mode.
The tool cannot level itself.
Inclined line operating mode; the pendulum is
locked, so the lines are not leveled.
20 m
2 m ... 50 m
3 s
±4.0° (typical)
± 3 mm at 10 m
< 2.2 mm at 5 m (typical)
Class 2, visible, 510­530 nm
Laser beams and the switch positions "Off", "On
locked" and "On unlocked"
Hilti B 12 Li-ion battery
Hilti B12 Li-ion battery 2600 mAh, temperature +24
°C (+72 °F): 8 h (typical)
Hilti B 12 Li-ion battery, 2600 mAh, temperature
+24 °C (+72 °F): 12 h (typical)
−10 ℃ ... 40 ℃
−25 ℃ ... 63 ℃
IP 54
BSW 5/8" | UNC 1/4"
0.05 mrad * 360°
< 0.95 mW
1.28 kg
2243556 English 15