Sony HANDYCAM DCR-SX40 Guía De Operaciónes página 25

• See page 44 on the " Handycam Handbook2
Confirm that your camcorder is
not connected to the computer.
_ Turn on the computer.
• Log on as an Administrator Ibr
installation.
• Close all applications running on the
computer belbre installing the software.
_ Place the supplied CD-ROM in
the disc drive of your computer.
The installation screen appears.
• If the screen does not appear, click
[Start] _ [Computer] (in Windows
XP, [My Computer]), then double click
[SONYPICTUTIL (E:)] (CD-ROM).
_ Click [Install].
Ha_dycam Application SoRwa_e
_ Select the language for the
application to be installed, then
click [Next].
_ Turn on your camcorder, then
connect the camcorder to the
computer using the USB cable
[supplied).
The [USB SELECT] screen appears on
the camcorder screen automatically.
_ Touch [I_IUSB CONNECT] on the
camcorder screen.
• If the [USB SELECT] screen does not
appear, touch t_ (HOME)
{_ (OTHERS) _ [USB CONNECT].
Click [Continue] on the computer
screen.
D
Read the terms of the license
agreement carefully. If you agree
to the terms, change C) to _, and
then click [Next] --_ [Install].
_fJ
Follow the on-screen instructions
to install the software.
• Depending on the computer, you may
need to install third party software. If
the installation screen appears, lbllow
the instructions to install the required
software.
• Restart the computer if required to
complete the installation.
<.
3
<o
o_
o
8
8
"u
oD
_5