General Power Tool Safety Warnings - SPARKY M 2000 HD Instrucciones De Uso

All models with index A in the abbreviation are equipped with Ø230 mm wheel. The lack of index A
indicates that the model is equipped with Ø180 mm wheel.
All models with Index B are equipped with electronic device for soft start and restriction of starting
current to 16 A.
Models with index P feature safety upon mains drop-out. In case of mains drop-out or unplugging for
more than 0.5 s the power tool remains switched off and can be started only after switching off and
button. (This safety feature is described in part "Operation".)
General power tool
safety warnings
WARNING! Read all safety warn-
ings and all instructions. Failure to follow
the warnings and instructions may result in
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or
1) Work area safety
a) Keep work area clean and well lit. Clut-
b) Do not operate power tools in explosive
atmospheres, such as in the presence
Power tools create sparks which may ignite
c) Keep children and bystanders away
while operating a power tool. Distrac-
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools.
plugs and matching outlets will reduce risk
b) Avoid body contact with earthed or
grounded surfaces, such as pipes, ra-
diators, ranges and refrigerators. There
is an increased risk of electric shock if your
4
EN
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool
d) Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the
e) When operating a power tool outdoors,
use an extension cord suitable for out-
door use. Use of a cord suitable for out-
f) If operating a power tool in a damp lo-
cation is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of electric
3) Personal safety
a) Stay alert, watch what you are doing
and use common sense when operating
a power tool. Do not use a power tool
ence of drugs, alcohol or medication.
A moment of inattention while operating
power tools may result in serious personal
b)
Always wear eye protection. Protective
equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protec-
tion used for appropriate conditions will re-
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or bat-
tery pack, picking up or carrying the
tool.
on the switch or energising power tools that
-