Replacing The Functional Part; Adjusting The Key Stroke - Franke AQLT0085 Instrucciones De Montaje Y Uso

20. Replacing the Functional Part

20.1 Close the water volume regulator (see
20.2 Trigger the fitting.
20.3 Remove the cover plate (a).
20.4 Use an Allen key to unscrew the screw (b) counter-clockwise.
20.5 Remove the rotary knob (c).
20.6 Use an Allen key to unscrew the screw (d) counter-clockwise.
20.7 Pull off the control unit (e).
20.8 Remove the circlip.
20.9 Pull out the functional part.
20.10 Reassemble in the reverse order.
20.11 Check the flow duration and correct if necessary (see

21. Adjusting the Key Stroke

21.1 Remove the cover plate (a).
21.2 If the key (b) has too much play, turn the screw (c) clockwise.
21.3 If water flows continuously, turn the screw (c) counter-clockwise.
21.4 Trigger the fitting.
21.5 Check the flow duration and correct if necessary (see
Chapter 10.14).
Chapter
Chapter
13.).
13.).
11