MyWay Q-Fix2.3 Instrucciones De Uso página 15

Idiomas disponibles

Fig. 4

Installing with additional Isoﬁ x connectors

WARNING: If your vehicle is equipped with Isoﬁ x anchor points, you can install your Q -Fix

2-3 seat, using the Isoﬁ x connectors, but ALWAYS and ONLY in combination with the car

seatbelt. To check the full compatibility, see the Vehicle Application List.

1. Line up the two plasic guides (B) with the Isoﬁ x connecting points (A)

2 Click both Isoﬁ x connectors to the Iso-ﬁ x anchor points. IMPORTANT: Make sure that

both connectors are properly attached to the Isoﬁ x anchor points (you should hear two

"clicks")

3. When the Isoﬁ x connectors are properly attached, the safety indicator on each side of the

Isoﬁ x connectors group is completely green

4 Complete the installation by using the car safety belts, following the instructions referred

to the different weight categories of the child.

Fig. 6

Fitting the car seat - 15 to 25 kg (Semi-Universal Category).

Suitable weight range: 15 to 25 kg (3 to 6 years approximately)

If your vehicle is equipped with Isoﬁ x anchor points, they can be used as per additional ﬁ t-

tings to obtain a more stable installation.

Some vehicles have no plastic guides to drive the connectors to the anchor points on their

seat. In this case you can use the plastic guides provided with the Q-Fix 2-3 seat. The plastic

guides for Isoﬁ x connectors shall be positioned as shown.

Fig. 6

Suitable weight range: 15 to 25 kg (3 to 6 years approximately)

Place the car seat on the appropriate vehicle seat. Press the car seat ﬁ rmly against the seat

and back of the vehicle seat. Ensure the vehicle seat is upright and adjusted to the rearward

position, as shown.

Fig. 7

Make sure that the diagonal vehicle seat belt section passes properly over the child's shoul-

der and that it's not twisted.

Fig. 8

To release the Isoﬁ x connectors

To release Isoﬁ x connectors, from the Isoﬁ x anchor points, press both release devices as

shown.

Fig. 9

To operate in a better condition, you may move the backrest slightly upwards.

Converting to a booster seat

Removing the backrest

Your child seat may become a booster seat. Press and hold down the backrest adjustment

libretto qfix4.indd 15

Fig. 7

Fig. 5

05/02/2010 15.09.04